980Glazed Roll Forming Machine

The Glazed Roll Forming Machine is divided into three parts, the roller forming part, the pressing part and the cutter part. The roller forming part of the Glazed Roll Forming Machine is driven by a motor, and the chain drives each roller to rotate. The pressing part of the Glazed Roll Forming Machine is a hydraulic cylinder that drives the mold to move up and down, which can press the colored steel into many sections, shaped like glazed tiles.

The cutter part of the Glazed Roll Forming Machine is a hydraulic cylinder that drives the cutter to move up and down, which can cut off the colored steel tiles. The production process of the Glazed Roll Forming Machine is as follows: the colored steel plate enters the roller forming part, and after being formed, it goes to the pressing part and is pressed into equidistant sections, and the cutter is responsible for cutting to a fixed length. Introduction to the control of Glazed Roll Forming Machine. The execution part includes a frequency converter drive motor, a hydraulic station motor, two hydraulic solenoid valves for pressing, and two hydraulic solenoid valves for the cutter.

The testing parts of the Glazed Roll Forming Machine include: pulse encoder for detecting the length of colored steel tiles, up and down travel switches for pressing, up and down travel switches for the cutter, up and down operation buttons for pressing, up and down travel buttons for the cutter, emergency stop switch, hydraulic start Stop switch and so on. The glazed tile equipment PLC uses KDN-K306-24AR of the KDN-K3 series. The Glazed Roll Forming Machine has 14 inputs/10 relay outputs, which just meets the input and output requirements. Equipped with KDN text screen, parameter setting, alarm display, help information, production data display, etc. can be completed.

Glazed Roll Forming Machine requires high-digital pulse input function. KDN-K306-24AR has excellent high-digital input performance, and the AB phase has good anti-interference ability. And use the fixed value interrupt function to determine the accuracy. The tile press has many parameters to be set, which can be set using the text screen. There are two types of Glazed Roll Forming Machine parameter settings: equipment parameters and user parameter settings. Equipment parameters include: single pulse length, overshoot, pressing distance, pressing time, cutting time, etc. The user parameters of the Glazed Roll Forming Machine include: number of sheets, length, first section, last section, pitch, number of sections, etc. The Glazed Roll Forming Machine control system can also complete the veneer cutting function.

Our company can produce various types of tile pressing machine products, and the roll forming plate types are diverse.

Q1:Are you a manufacturer?

A1:Yes absolutely. Welcome a lot for your visiting to us.

Q2:Do you have after-sale support?

A2:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 

Q3:Is there quality control when manufacturing the lines?

from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.

Q4:What's your strength comparing to the other supplier?

A4:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.

Q5: Any other service?

A5: We can manufacture, design, installation and debug various roll forming machines including standard and customized machines.
It is free to assemble machine and train your works, but the buyer should pay for the round-trip airplane ticket, and arrange
accommodation during that time.